Product name: KBF1800 box-type furnace
Model number: KBF1800
Product Summary:
KBF1800 Box furnace 1800 type silicon molybdenum rod for heating components, the double shell structure and yu electrical program temperature control instrument, phase trigger, silicon control, furnace with Germany imported alumina crystal fiber material, double furnace shell with air cooling system, can quickly lift temperature, the furnace temperature equilibrium, low surface temperature, high temperature rate, energy saving, universities, research institutes, industrial and mining enterprises do powder, ceramic sintering, high temperature experiment, quality detection with ideal products.
product description
KBF1800 Detailed introduction of the box-type furnace:
KBF1800 Box furnace 1800 type silicon molybdenum rod for heating components, the double shell structure and yu electrical program temperature control instrument, phase shift trigger, silicon control, furnace with Germany imported alumina crystal fiber material, double furnace shell with air cooling system, can quickly lift temperature, the furnace temperature equilibrium, low surface temperature, high temperature rate, energy saving, universities, research institutes, industrial and mining enterprises do powder, ceramic sintering, high temperature experiment, quality detection with ideal products.
[Heating element-molybdenum rod]
☆ The thermal end thickness of silicon molybdenum rod D1 is 7mm, 6MM, the heating end is thick, not easy to bend, the rod surface load is low, long service life.
☆ Using the hot bending technology, uniform resistance, long service life
☆ Lu cold end length is 210mm, 400X300X300 furnace is 260, general manufacturers use 180mm, cold end long furnace top temperature is low.
☆ Silicon molybdenum rod surface oxidation amorphous film is dense, can better protect the carbon rod.
[Connecting to a computer]
The furnace is equipped with communication interface and software, which can directly control the parameters of the furnace through the computer, and can observe the temperature value of PV and SV on the furnace and the operation of the instrument. The actual heating curve of the furnace will be drawn in real time, and can save the temperature data of each moment, which can be adjusted at any time.
[firepot]
☆ Vacuum suction and filter-formed aluminum oxide polycrystalline fiber curing furnace.
☆ Using Japanese technology for molding.
☆ The spacing and pitch of the resistance wires in the furnace are all arranged according to the Japanese thermal technology, and the thermal field is simulated through the thermal software
☆ Using 4-side heating (left and right, upper and lower and four sides), the temperature field is more balanced
[Temperature control mode]: Adopt the temperature control instrument
☆ 30 section temperature control intelligent PID adjustment.
☆ With over-temperature protection overtemperature or break protection electric furnace heating circuit automatically cut off, (when the electric furnace temperature exceeds 1720 degrees or the thermocouple burned off, the AC relay on the main circuit will automatically disconnected, the main circuit disconnected, panel ON lamp ON, OFF light on, limited protection electric furnace).
☆ With the function of power off protection, that is, when the power is powered off, the program does not rise from the starting temperature, but from the furnace temperature when the power is off.
☆ The instrument has the function of temperature self-setting
[trigger]
☆ Phase shift trigger (with soft start and flow restriction)
☆ Current limiting function: no matter how to set the heating rate, the secondary current of our electric furnace is always limited to 170A, which effectively protects the equipment. Due to the flow limiting function, the furnace door can be opened at high temperature. If the electric furnace you use needs to limit the heating rate of the furnace (e. g., specified as not exceeding 3℃ / min, etc. after 1400℃), a non-current limiting trigger is used. If the heating rate is set correctly or the heating rate is too fast, the current will be very large and the equipment will trip or burn out.
☆ Soft start function: the current will slowly increase when the boot, and the impact on the heating element is small, which is conducive to the extension of the life of the heating element
☆ Protection function: if the current exceeds the limit current, the trigger will automatically cut off the trigger function to cut off the current protection electric furnace.
[UL Certified Transformer]
☆ Transformer cable is pure copper
☆ The transformer sound is low
☆ Low transformer temperature