KTL1700-1700 double-temperature zone tubular furnace

Product name: KTL1700-1700 double temperature zone tube furnace
Model number: KTL1700-1700
Minimum starting quantity: 1

Product Summary:
TL1700-1700 double temperature area tube furnace with 1800 type silicon molybdenum rod heating element, there are two heating areas, using double shell structure, each heating area can be 30 sections of program temperature control, phase shift trigger, silicon control control, furnace using aluminum oxide polycrystalline fiber material, the highest temperature can reach 1700 degrees.
KTL1700-1700 double temperature area tubular furnace detailed introduction:
KTL1700-1700 double temperature zone tube furnace with type 1800 silicon molybdenum rod heating element, There are two heating zones, Using a double-layer shell structure, Each heating area can perform 30 sections of program temperature control, Phase shift triggered, SCR controlled, The furnace is made of alumina polycrystalline fiber material, With stainless steel flanges, The stainless steel flange is fitted with an air nozzle, valve and pressure gauge, The vacuum degree can reach 10-3 Pa, The furnace is of the horizontal type, Two temperature zones can be independently controlled and set at different temperatures, convenient to use, simplicity of operator, The furnace has the advantages of temperature field equilibrium, low surface temperature, fast lifting temperature rate, energy saving and so on, It is an ideal product for universities, scientific research institutes, industrial and mining enterprises to do high temperature atmosphere sintering, atmosphere reduction, CVD experiment and vacuum annealing.
Software control system: the furnace is equipped with communication interface and software, can directly through the computer control furnace parameters, and can observe from the computer on the furnace PV and SV temperature value and the operation of the instrument, the actual heating curve computer in real time, and can save each moment of temperature data, can be out at any time.(apolegamy)

Open cover protection system: the furnace is equipped with a travel switch, when the furnace cover is opened, automatically cut off the power supply, effectively ensure the safety of users.
Seal system: the double-layer silicone O-ring extrusion seal between the furnace pipe and the flange, easy to remove, repeatable removal, good air tightness, can ensure that the 12-hour pressure gauge pointer does not deflection.
Vacuum system: can be equipped with TW-1.5A vacuum pump and 10-1Pa vacuum pump or 10-4Pa imported molecular pump.
Furnace material: alumina fiber furnace material, do not drop powder, material insulation performance, high reflectivity, temperature field balance, heat resistance and cooling shrinkage ability is strong.
Heating elements: silicon-carbon rod, silicon-molybdenum rod.
Leakage protection function: the furnace is equipped with leakage air switch, when the furnace body leakage automatic power, to ensure the safety of use.
Gas supply system: The furnace is equipped with a floormeter, and the customer can control the flow rate of the gas through the floormeter or proton flow meter (please see the options for details).
Flange: using double ring sealing technology, effectively improve the atmosphere of flange, flange is equipped with a variety of joints, can be connected to resistance vacuum meter, KF 25 bellows and can be easy to remove the hinge type.
Flange bracket: the flange is supported by the flange bracket, which effectively eliminates the stress of the flange frame on the corundum tube, and extends the service life of the corundum tube.

Technical parameters of KTL1700-1700 double-temperature zone tubular furnace:

control method
Use the yu electrical program temperature control instrument (standard equipment
Optional Japanese conductive program temperature controller
(1)The temperature control of section 30 program can only be adjusted by PID.
(2)with over temperature protection overtemperature or break when the electric furnace heating circuit automatically cut off, (when the electric furnace temperature exceeds 1720 degrees or the thermocouple burned off, the AC relay on the main circuit will be automatically disconnected, the main circuit disconnected, panel ON light off, OFF light on, limited protection electric furnace).
(3) With 485 communication interface (standard when choosing software)
(4), has the function of power off protection, that is, when the power is off and then start the furnace, the program does not rise from the starting temperature, but from the furnace temperature when the power is off.
(5) The instrument has the function of temperature self-setting