VTF-1400 vertical tubular furnace

Product name: VTF-1400 vertical tubular furnace

Model number: VTF-1400

Product Summary:
VTF-1400 vertical tubular furnace with silicon carbon rod for heating elements, using double shell structure and yu electric temperature control instrument, can 30 program temperature control, phase shift trigger, silicon controlled control, furnace with aluminum polycrystalline fiber material, furnace is divided into about two circle, need rapid cooling or change the pipe, can open furnace, furnace flange can stainless steel sealing, stainless steel flange installed with nozzle, valve and pressure gauge, vacuum vacuum degree can reach 10-3 Pa.

product description
VTF-1400 vertical tubular furnace details:
1.heating element
(1)The thickness D1 of the hot end of the silicon molybdenum rod is 7mm, the 6MM used by the general manufacturers, the heating end is thick, not easy to bend, the surface load of the rod is low, and the service life is long.
(2)the use of hot bending technology, uniform resistance, long service life
(3)The length of Lu cold end is 210mm, the 400X300X300 furnace is 260, the general manufacturer uses 180mm, the cold end long furnace roof temperature is low.
(4)the silicon molybdenum rod surface oxidation amorphous film dense, can better protect the silicon molybdenum rod.
2.Install the air switch and the leakage protector:
When the circuit is overcurrent or leakage, the empty meeting is automatically disconnected.
3.Can be connected to the computer
The furnace is equipped with communication interface and software, which can directly control the parameters of the furnace through the computer, and can observe the temperature value of PV and SV on the furnace and the instrument from the computer. The actual heating curve of the furnace will be drawn in real time, and can save the temperature data of each moment, which can be adjusted at any time
firepot
(1)vacuum suction filter molding of high quality high purity alumina polycrystalline fiber curing furnace.
(2)Using Japanese technology to shape.
(3)The spacing and pitch of the resistance wire in the furnace are all arranged according to the optimal thermal technology in Japan, and the thermal field is simulated through the thermal software
(4)With 4 weeks of heating, the temperature field is more balanced
(5)The furnace does not drop powder, the material insulation performance is good, high reflectivity, temperature field balance, resistance to heat rise and cold contraction ability is strong
5.Optional UL certification electrical board (all imported electrical appliances approved by UL certification)

Technical parameters of VTF-1400 vertical tubular furnace:

3.trigger
(1)Phase shift trigger (with soft start and flow limiting function)
(2)Flow limiting function: no matter how the heating rate is set, the secondary current of our electric furnace is always limited to 170A, which effectively protects the equipment. Due to the flow limiting function, the furnace door can be opened at high temperature. If the electric furnace you use needs to limit the heating rate of the furnace (e. g., specified as not exceeding 3℃ / min, etc. after 1400℃), a non-current limiting trigger is used. If the heating rate is set correctly or the heating rate is too fast, the current will be very large and the equipment will trip or burn out.
(3) Soft start function: the current will slowly increase when the startup, and the impact on the heating element is small, which is conducive to the extension of the life of the heating element
(4) Protection function: if the current exceeds the limit current, the trigger will automatically cut off the trigger function to cut off the current protection electric furnace.
7.UL certified transformer
(1)Transformer cable is pure copper
(2)The transformer sound is small
(3)Transformer temperature and body is low
8.Multiple variety of flanges (diameter from 25 to 250mm after consultation)
9.Certification