KBF1100-Q stainless steel inner tank atmosphere box type furnace

Product name: KBF1100-Q stainless steel inner tank atmosphere box type furnace

Model number: KBF1100-Q

Minimum minimum: 1

Product Summary:
KBF1100-Q stainless steel tank atmosphere box furnace in Sweden Contel resistance wire for heating elements, using double shell structure and Japan island electric 40 program temperature control system, phase trigger, silicon control, furnace with alumina crystal fiber material, double furnace shell with air cooling system, can quickly lift temperature, 30 minutes can reach 1000 degrees, using stainless steel tank, tank sealed directly.

product description
KBF1100-Q stainless steel inner liner atmosphere tank type furnace is introduced in detail:
KBF1100-Q stainless steel tank atmosphere tank furnace with Swedish Contel resistance wire as the heating element, Using the double shell structure and JIST 40 section program temperature control system, Phase shift triggered, SCR controlled, The furnace is made of alumina polycrystal fiber material, Double furnace housing with air cooling system, Can quickly lift and lower the temperature, To reach 1,000 degrees in 30 minutes, Using the stainless steel inner liner, Direct sealing of the inner liner, Can be pre-vacuum, cover sealing with silicone mud, furnace door with silicone pad and water cooling system, Gas enters through the rear chamber after passing through the flowmeter, A burning mouth at the air outlet, Can pass through hydrogen, argon, nitrogen, oxygen, carbon monoxide, ammonia decomposition gas and other gases, It can also be used under a vacuum, The furnace has the advantages of temperature balance, low surface temperature, fast lifting temperature rate, energy saving, clean furnace and easy pollution, It is an ideal product for universities, scientific research institutes and industrial and mining enterprises for atmosphere protection and sintering, atmosphere reduction and degreasing.
Electrical appliances: Chint
Heating element: Contel resistance wire (imported from Sweden)
Furnace: alumina polycrystal fiber (imported from USA)
Temperature control instrument: Japan (with overtemperature, over temperature, break protection functions, 40 section program temperature control system, temperature control accuracy ± 1℃)
Intake air system: float flowmeter
Inner bladder: high-temperature stainless steel
Pressure measuring system: pressure gauge (resistance vacuum meter can be configured as required (optional))

KBF1100 Technical parameters of stainless steel inner liner atmosphere tank furnace:

Standard delivery:
(1)1 crucible pliers
(2)1 flowmeter
(3)High-temperature cotton gloves, 1 pay
(4)1 piece of alumina cushion brick
1.Heating elements
resistance wire
2.Install the air switch and the leakage protector:
When the circuit is overcurrent or leakage, the empty meeting is automatically disconnected.
3.Can be connected to the computer
The furnace is equipped with communication interface and software, which can directly control the parameters of the furnace through the computer, and can observe the temperature value of PV and SV on the furnace and instrument from the computer. The actual heating curve of the furnace will be drawn in real time, and can save the temperature data at each moment, which can be adjusted at any time
4.Furnace
(1)vacuum suction filter formed alumina polycrystalline fiber curing furnace.
(2)Using Japanese technology to shape.
(3)The spacing and pitch of the resistance wire in the furnace are all arranged according to the Japanese thermal technology and simulate the thermal field through the thermal software
(4)With 4 weeks of heating, the temperature field is more balanced
(5)The furnace does not drop powder, the material insulation performance is good, high reflectivity, temperature field balance, resistance to heat rise and cold contraction ability is strong
5.Optional UL certification electrical board (all imported electrical appliances approved by UL certification)

6.Trigger
(1)Phase shift trigger (with soft start and flow limiting function)
(2)Flow limiting function: no matter how the heating rate is set, the secondary current of our electric furnace is always limited to 170A, which effectively protects the equipment. Due to the flow limiting function, the furnace door can be opened at high temperature. If the electric furnace you use needs to limit the heating rate of the furnace (e. g., specified as not exceeding 3℃ / min, etc. after 1400℃), a non-current limiting trigger is used. If the heating rate is not set correctly or the heating rate is too fast, the current will be very large and the equipment will trip or burn out.
(3)Soft start function: the current will slowly increase when the machine is started, and the impact on the heating element is small, which is conducive to the extension of the life of the heating element
(4)Protection function: if the current exceeds the limit current, the trigger will automatically cut off the trigger function to cut off the current protection electric furnace.
7.UL certified transformer
(1)Transformer cable is pure copper
(2)The transformer sound is small
(3)Transformer temperature and body is low
8.Certification