Product name: KTL1400 atmosphere tube furnace
Model number: KTL1400
Minimum starting quantity: 1
Product Summary:
KTL1400 Tubular furnace the tubular furnace with silicon carbon heating components, using double shell structure and yu electric 40 section program temperature control system, phase trigger, silicon control, furnace with 1800 type alumina crystal fiber material, double furnace shell equipped with air cooling system, can quickly lift temperature, using 99 jade tube, both ends with stainless steel flange seal, with float flow meter control intake flow, the furnace has the temperature equilibrium, low surface temperature, low temperature rate, energy saving, etc.
product description
KTL1400 Detailed introduction of tube furnace:
KTL1400 Pipe furnace with silicon carbon rod as the heating element, Using the double shell structure and yu electric temperature control instrument, Multiple program temperature control, Phase shift triggered, SCR controlled, The furnace is made of alumina polycrystalline fiber material, Using the flow meter to control the intake flow furnace pipe at both ends of the stainless steel flange sealing, The stainless steel flange is fitted with an air nozzle, valve and pressure gauge, The vacuum degree can reach 10-3 Pa, The furnace is of the horizontal type, convenient to use, Simple operation The furnace has the advantages of temperature field balance, low surface temperature, fast lifting temperature rate, energy saving and so on, It is an ideal product for universities, scientific research institutes, industrial and mining enterprises to do high temperature atmosphere sintering, atmosphere reduction, CVD experiment and vacuum annealing.
NO.1 the heating element
(1)The thermal end thickness d of the silicon carbon rod is 14mm, 12MM used by the general manufacturers, the heating end is thick, not easy to bend, the surface load of the rod is low, and long service life.
(2)The length of m cold end is 210mm, the general manufacturer adopts 180mm, and the top temperature of cold end is low.
(3)The oxidized amorphous film is dense, which can better protect the carbon rod.
NO.2 Equipped with an air switch and a leakage protector
When the circuit is overcurrent or leakage, the empty meeting is automatically disconnected.
NO.3 Connect to a computer (buy)
KTL1400 Atmosphere tube furnace can be equipped with communication interface and software, can directly through the computer control the parameters of the furnace, and can observe from the computer furnace PV and SV temperature value and instrument operation, the actual heating curve computer in real-time, and can save the temperature data of each moment, can be out at any time
NO.4 furnace
(1) vacuum suction filter formed alumina polycrystalline fiber curing furnace.
(2) Using Japanese technology to shape.
(3) the furnace material has low heat capacity, low heat conduction coefficient, so that less heat dissipation, good heat preservation, high reflectivity. Temperature field equilibrium.
(4) furnace alumina wire thin and long, high temperature resistance, heat rise and shrinkage ability.
(5) The furnace surface is smooth, not easy to drop powder.
NO.5 optional UL certified electrical board (all UL certified imported appliances)
NO.6 Multiple selection of flanges (diameter from 25 to 250mm)
Control mode: adopt temperature control instrument (standard)
1.Intelligent PID adjustment of temperature control.
2.with over temperature protection when the electric furnace heating circuit automatically over temperature or break off, (when the electric furnace temperature exceeds 1200 degrees or the thermocouple burned off, the AC relay on the main circuit will automatically disconnected, the main circuit disconnected, the panel ON lamp off, OFF light, limited protection electric furnace).
3.With the function of power off protection, that is, when the power is cut off and the power is started, the program does not rise from the starting temperature, but from the furnace temperature when the power is cut off.
4.The instrument has the function of temperature self-setting
KTL1400 Vacuum degree of tube furnace:
1.generally rough vacuum, the gas inside the furnace tube out with: TW-1.5A can be
2.2 XZ-2 vacuum pump can pump the vacuum degree of the tubular furnace tube to about 10Pa
3.VS-0.1 vacuum system can pump the vacuum in the tube to 0.1Pa (with resistance vacuum meter)
4.VS high vacuum system (the system is composed of molecular and mechanical pumps) can pump the vacuum degree to 10-3 Pa
Flange interface is convertible:
1.in order to increase the pumping rate, to achieve the requirements of a higher vacuum. The original hose joint can be replaced with a KF-25 interface (VS-0.1 and VS high vacuum system interface are both KF 25)
2.If used for gas supply system, the original hose joint can be replaced with Φ 6.35mm double card sleeve joint.