Product name: KTL1700 atmosphere tube furnace
Model number: KTL1700
Minimum starting quantity: 1
Product Summary:
KTL1700 The atmosphere tube furnace takes 1800 type silicon molybdenum rod as the heating element, adopts double shell structure and yudian 40 section program temperature control system, phase shift trigger, silicon control control, furnace adopts alumina polycrystal fiber material imported from Germany, the double furnace shell is equipped with air cooling system, can quickly rise and fall the temperature.
product description
KTL1700 Detailed introduction of the atmosphere tube furnace:
KTL1700 Atmosphere tube furnace with silicon and molybdenum rod as the heating element, Using the double shell structure and yu electric temperature control instrument, 30 program temperature control, Phase shift triggered, SCR controlled, The furnace is made of alumina polycrystalline fiber material, Double furnace housing with air cooling system, Can quickly lift and lower the temperature, Adopt imported 99.9 high purity corundum tube, both ends with stainless steel flange sealing, Using the float flow meter to control the intake flow rate, the furnace has the advantages of temperature field equilibrium, low surface temperature, fast lifting temperature rate, energy saving and so on, It is an ideal product for universities, scientific research institutes, industrial and mining enterprises to do high temperature atmosphere sintering, atmosphere reduction, CVD experiment and vacuum annealing.
NO.1 The heating element
(1) The thermal end thickness of silicon molybdenum rod D1 is 7mm, 6MM used by general manufacturers, the heating end is thick, not easy to bend, the surface load of the rod is low, and long service life.
(2) The use of hot bending technology, uniform resistance and long service life
(3) The length of Lu cold end is 210mm, the 400X300X300 furnace is 260, generally manufacturers use 180mm, the cold end long furnace roof temperature is low.
(4) The surface oxidized amorphous film of the silicon molybdenum rod is dense, which can better protect the silicon molybdenum rod.
NO.2 air switch and electric leakage protection
When the circuit is overcurrent or leakage, the empty meeting is automatically disconnected.
NO.3 Connect to a computer (buy)
KTL1700 Atmosphere tube furnace can be equipped with communication interface and software, can directly through the computer control the parameters of the furnace, and can observe from the computer furnace PV and SV temperature value and instrument operation, the actual heating curve computer real-time drawing, and can save the temperature data of each moment, can be out at any time
NO.4 furnace
(1) vacuum suction filter formed alumina polycrystalline fiber curing furnace.
(2) Using Japanese technology to shape
(3) The spacing and pitch of the resistance wire in the furnace are all arranged according to the Japanese thermal technology and simulate the thermal field through the thermal software
(4) With 4 weeks of heating, the temperature field is more balanced
(5) The furnace does not drop powder, the material insulation performance is good, high reflectivity, temperature field balance, resistance to heat rise and cold contraction ability is strong
NO.5 optional UL certified electrical board (all UL certified imported appliances)
NO.6 triggers
Phase shift trigger (with soft start and flow limit function)
(2) Current limiting function: no matter how to adjust the heating time, the secondary current of our electric furnace after the transformer is limited to 170A, with limited protection of the equipment. Non-current limiting trigger, if the heating rate is set correctly or the current is too high at low temperature, the equipment will trip or burn out.
(3) Soft start function: the current will slowly increase when the startup, and the impact on the heating element is small, which is conducive to the extension of the life of the heating element
(4) Protection function: if the current exceeds the limit current, the trigger will automatically cut off the trigger function to cut off the current protection electric furnace.
NO.7 UI certified transformer
(1) Transformer cable is pure copper
(2) The transformer sound is small
(3) Transformer temperature is low
NO.8 A variety of flanges are available
NO.9 Certification