KBF1700-LF-2 vacuum-atmosphere lifting furnace

Product name: KBF1700-LF-2 vacuum-atmosphere lifting furnace

Model number: KBF1700-LF-2

Product Summary:
KBF1700-LF-2 vacuum atmosphere lifting furnace 1800 type silicon molybdenum rod for heating element, using double shell structure and yu electric 30 program temperature control system, phase shift trigger, silicon control, furnace with Japan imported 1800 type alumina crystal fiber material, double furnace shell with air cooling system, can quickly lift temperature, the furnace has the advantages of temperature field equilibrium, low surface temperature, lifting temperature rate, energy saving, etc

product description
KBF1700-LF-2 vacuum atmosphere lifting furnace is described in detail:
KBF1700-LF-2 lifting furnace with 1800 type silicon molybdenum rod as the heating element, Using the double-layer shell structure and the Yudian 30-section program temperature control system, Phase shift triggered, SCR controlled, The furnace adopts the 1800 type alumina polycrystal fiber material imported from Japan, Double furnace housing with air cooling system, Can quickly lift and lower the temperature, The furnace has the advantages of temperature field equilibrium, low surface temperature, fast lifting temperature rate, energy saving and so on, Easy to take up the materials, Without requiring the crucible tongs to reach into the furnace, Suitable for high-temperature feeding and annealing, It is an ideal product for universities, scientific research institutes, industrial and mining enterprises to do powder sintering, ceramic sintering, glass smelting, high temperature experiment and quality testing.
1.heating element
(1)The thickness D1 of the hot end of the silicon molybdenum rod is 7mm, the 6MM used by the general manufacturers, the heating end is thick, not easy to bend, the surface load of the rod is low, and the service life is long.
(2)the use of hot bending technology, uniform resistance, long service life
(3)The length of Lu cold end is 210mm, the 400X300X300 furnace is 260, the general manufacturer uses 180mm, the cold end long furnace roof temperature is low.
(4)the silicon molybdenum rod surface oxidation amorphous film dense, can better protect the silicon molybdenum rod.
2.Install the air switch and the leakage protector:
When the circuit is overcurrent or leakage, the empty meeting is automatically disconnected

KBF1700-LF-2 vacuum atmosphere lifting furnace technical parameters:

3.It can be connected to the computer
The furnace is equipped with communication interface and software, which can directly control the parameters of the furnace through the computer, and can observe the temperature value of PV and SV on the furnace and the instrument from the computer. The actual heating curve of the furnace will be drawn in real time, and can save the temperature data of each moment, which can be adjusted at any time
4.Furnace
(1)vacuum suction filter molding of high quality high purity alumina polycrystalline fiber curing furnace.
(2)Using Japanese technology to shape.
(3)The spacing and pitch of the resistance wire in the furnace are all arranged according to the optimal thermal technology in Japan, and the thermal field is simulated through the thermal software
(4)Using 4 weeks of heating makes the temperature field more balanced
(5)The furnace does not drop powder, the material insulation performance is good, high reflectivity, temperature field balance, resistance to heat rise and cold contraction ability is strong
5.Optional UL certification electrical board (all imported electrical appliances with UL certification)
6.Trigger
(1)Phase shift trigger (with soft start and flow limiting function)
(2)Flow limiting function: no matter how the heating rate is set, the secondary current of our electric furnace is always limited to 170A, which effectively protects the equipment. Due to the flow limiting function, the furnace door can be opened at high temperature. If the electric furnace you use needs to limit the heating rate of the furnace during the heating process (e. g., it shall not exceed 3℃ / min, etc. after 1400℃), a non-current limiting trigger is used. If the heating rate is set correctly or the heating rate is too fast, the current will be very large and the equipment will trip or burn out.
(3)Soft start function: the current will slowly increase when the startup, and the impact on the heating element is small, which is conducive to the extension of the life of the heating element
(4)Protection function: if the current exceeds the limit current, the trigger will automatically cut off the trigger function to cut off the current protection electric furnace.
7.UL certified transformer
(1)Transformer cable is pure copper
(2)The transformer sound is small
(3)Transformer temperature and body is low
8.Certification
Seal system: the furnace roof cover and furnace door (welded in other places) are equipped with silicone O-ring extrusion seal, convenient removal, repeatable removal, good air tightness, and can ensure that the 8-hour pressure gauge pointer does not deflection.
The furnace is a three-layer shell structure, and there is a layer of gallbladder in the sealing layer, which will not be squeezed into the furnace during vacuum.
Advantages of the atmosphere lifting furnace:
1.can be furnace around the furnace, the temperature field is more balanced.
2.it is convenient to take the material, especially at high temperature need to take the material, such as the material dropped out of the furnace after the user took from the tray, so that there will be no radiant heat in the furnace, to avoid scalding people.
3.There are four rod supports around the pallet, and the material is very stable on the pallet.