VTF-1700 vertical pipe quenching furnace

Product name: VTF-1700 vertical pipe quenching furnace

Model number: VTF-1700

Product Summary:
Equipped with communication interface and software, you can directly control the parameters of the furnace through the computer, and can observe the PV and SV temperature value of the furnace and the instrument operation from the computer. The actual heating curve of the stove will be drawn in real time, and can save the temperature data at each moment, which can be pulled out at any time

product description
VTF-1700 Detailed introduction of vertical pipe quenching furnace:
1.heating element
(1)The thermal end thickness of silicon molybdenum rod D1 is 7mm, 6MM used by general manufacturers, the heating end is thick, not easy to bend, the surface load of the rod is low, and long service life.
(2)The use of hot bending technology, uniform resistance and long service life
(3)The length of Lu cold end is 210mm, the 400X300X300 furnace is 260, generally manufacturers use 180mm, the cold end long furnace roof temperature is low.
(4)The surface oxidized amorphous film is dense, which can better protect the silicon molybdenum rod.
2.Install the air switch and the leakage protector:
When the circuit is overcurrent or leakage, the empty meeting is automatically disconnected.
3.Can be connected to the computer
The furnace is equipped with communication interface and software, which can directly control the parameters of the furnace through the computer, and can observe the temperature value of PV and SV on the furnace and instrument from the computer. The actual heating curve of the furnace will be drawn in real time, and can save the temperature data at each moment, which can be adjusted at any time
4.Furnace
(1) vacuum suction filter molding of high quality high purity alumina polycrystalline fiber curing furnace.
(2)Using Japanese technology to shape.
(3)The spacing and pitch of the resistance wire in the furnace are all arranged according to the optimal thermal technology in Japan, and the thermal field is simulated through the thermal software
(4)With 4 weeks of heating, the temperature field is more balanced
(5)The furnace does not drop powder, the material insulation performance is good, high reflectivity, temperature field balance, resistance to heat rise and cold contraction ability is strong

Technical parameters of VTF-1700 vertical pipe quenching furnace:

5.Optional UL certification electrical board (all imported electrical appliances approved by UL certification)
6.Trigger
(1)Phase shift trigger (with soft start and flow limiting function)
(2)Flow limiting function: no matter how the heating rate is set, the secondary current of our electric furnace is always limited to 170A, which effectively protects the equipment. Due to the flow limiting function, the furnace door can be opened at high temperature. If the electric furnace you use needs to limit the heating rate of the furnace (e. g., specified as not exceeding 3℃ / min, etc. after 1400℃), a non-current limiting trigger is used. If the heating rate is set correctly or the heating rate is too fast, the current will be very large and the equipment will trip or burn out.
(3)Soft start function: the current will slowly increase when the startup, and the impact on the heating element is small, which is conducive to the extension of the life of the heating element
(4)Protection function: if the current exceeds the limit current, the trigger will automatically cut off the trigger function to cut off the current protection electric furnace.
7.UL certified transformer
(1)Transformer cable is pure copper
(2)The transformer sound is small
(3)Transformer temperature and body is low
8.Multiple variety of flanges (diameter from 25 to 250mm after consultation)